ER308LSi SS MIG WIRE | FEATURES
- ER308LSi has the same analysis as ER308L, except for the higher silicon content.
- The higher silicon improves the usability of the filler metal in the gas metal arc welding process.
- If the dilution by the base metal produces a low ferrite or fully austenitic weld, the crack sensitivity of the weld is somewhat higher than that of a lower silicon content weld metal.
- Welding process of ER308LSi SS MIG wire applied to MIG(Metal Inert Gas Welding) or GMAW(Gas Metal Arc Welding).
SPECIFICATION CONFORMANCES
AWS: A5.9/A5.9M: ER308LSi
UNS Number: S30888
BS EN ISO 14343A: 19 9 L Si
WELDING POSITIONS
F,V,OH,H
TYPICAL APPLICATION
- ER308LSi SS MIG wire is used for welding 304L, 304LN and 308L base metal.
- It produces exceptionally smooth welds for applications that require a good cosmetic appearance.
- Performs exceptionally at high wire feed speeds
SHIELDING GAS
Short Circuiting Transfer: 90% He/ 7.5% Ar/ 2.5% O2
Axial Spray Transfer: 98% Argon / Balance Oxygen
WIRE COMPOSITION – As Required As per AWS A5.9/A5.9M
| Alloy Type | %C | %Cr | %Ni | %Mo | %Mn | %Si | %P | %S | %N | %Cu |
|---|---|---|---|---|---|---|---|---|---|---|
| ER308LSi | 0.03max | 19.5-22.0 | 9.0-11.0 | 0.75max | 1.0-2.5 | 0.65-1.00 | 0.03max | 0.03max | – | 0.75max |
| Typical Results | 0.011 | 20.2 | 10.1 | 0.43 | 1.8 | 0.78 | 0.012 | 0.014 | – | 0.51 |
DIAMETER
| INCH | 0.023” | 0.030” | 0.035” | 0.040” | 0.045” | 0.062” |
|---|---|---|---|---|---|---|
| MM | 0.6 | 0.8 | 0.9 | 1.0 | 1.2 | 1.6 |
Standard Package Dimensions and Weights
| Product | Spool Diameter(in) | Spool Diameter(mm) | Nomimal Weight(lbs) | Nominal Weight(kg) |
|---|---|---|---|---|
| Spools | 4 | 100 | 1-1/2, 2-1/2 | 0.7, 1.1 |
| 8 | 200 | 10 | 4.5 | |
| 12 | 300 | 25, 33 | 11.4, 15 | |
| 14 | 350 | 50 | 22.8 |
*Net weights shall be within ±10% of the nominal weight.
TYPICAL MECHANICAL PROPERTIES (As Welded)
| AWS No. | Tensile Strength, min(ksi) | Tensile Strength, min(MPa) | Elongation, min(%) | Heat Treatment |
|---|---|---|---|---|
| ER308LSi | 92 | 635 | 46 | None |
Available Diameters MIG with Operating Range in Amps
| Diameter(inch) | Diameter(mm) | Amps(A) |
|---|---|---|
| 0.023” | 0.6 | 35 – 70 |
| 0.030” | 0.8 | 50 – 100 |
| 0.035” | 0.9 | 100 – 150 |
| 0.045” | 1.2 | 150 – 200 |
MIG SPOOL DIMENSIONS
| Dimensions of 4, 8 and 12 in [100, 200 and 300 mm] Standard Spools | |||||||||
| Type | Spools Details | 4 in [100mm] | 8 in [200mm] | 12 in [300mm] | 14 in [350mm] | ||||
| inch | mm | inch | mm | inch | mm | inch | mm | ||
| A | Diameter, max | 4.0 | 102 | 8.0 | 203 | 12 | 305 | 14 | 355 |
| B | Width Tolerance | 1.75 ±0.03 |
46 +0，-2 |
2.16 ±0.03 |
56 +0，-3 |
4.0 ±0.06 |
103 +0,-3 |
4.0 ±0.06 |
103 +0,-3 |
| C | Diameter Tolerance | 0.63 +0.01.-0 |
16 +1,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
| D | Diameter between Axes Tolerance | — — |
— — |
1.75 ±0.02 |
44.5 ±0.5 |
1.75 ±0.02 |
44.5 ±0.5 |
1.75 ±0.02 |
44.5 ±0.5 |
| E | Diameter Tolerance | — — |
— — |
0.44 +0,-0.06 |
10 +1,-0 |
0.44 +0,-0.06 |
10 +1,-0 |
0.44 +0,-0.06 |
10 +1,-0 |