ER410NiMo SS MIG WIRE | FEATURES
- The nominal composition (wt.-%) of ER410NiMo is 12 Cr, 4.5 Ni, 0.55 Mo.
- Preheat and inter-pass temperature of 300°F (150°C) or greater are recommended during welding.
- Final postweld heat treatment should not exceed 1150°F [620°C], as higher temperatures may result in rehardening due to untempered martensite in the microstructure after cooling to room temperature.
- Welding process of ER410NiMo SS MIG wire applied to MIG(Metal Inert Gas Welding) or GMAW(Gas Metal Arc Welding).
SPECIFICATION CONFORMANCES
AWS: A5.9/A5.9M: ER308H
UNS Number: S30880
BS EN ISO 14343B: SS308H
WELDING POSITIONS
F,V,OH,H
TYPICAL APPLICATION
- ER410NiMo SS MIG wire is primarily designed for welding ASTM CA6NM castings or similar material, as well as light-gauge 410, 410S, and 405 base metals.
- Applied to Valve Bodies, Power Generation, High Pressure Piping.
SHIELDING GAS
98% Argon+2% O2
WIRE COMPOSITION – As Required As per AWS A5.9/A5.9M
| Alloy Type | %C | %Cr | %Ni | %Mo | %Mn | %Si | %P | %S | %Cu | Other |
|---|---|---|---|---|---|---|---|---|---|---|
| ER410NiMo | 0.06max | 11.0-12.5 | 4.0-5.0 | 0.4-0.7 | 0.6max | 0.5max | 0.03max | 0.03max | 0.75max | – |
| Typical Results | 0.043 | 11.6 | 4.6 | 0.53 | 0.44 | 0.35 | 0.012 | 0.011 | 0.47 | – |
DIAMETER
| INCH | 0.023” | 0.030” | 0.035” | 0.040” | 0.045” | 0.062” |
|---|---|---|---|---|---|---|
| MM | 0.6 | 0.8 | 0.9 | 1.0 | 1.2 | 1.6 |
Standard Package Dimensions and Weights
| Product | Spool Diameter(in) | Spool Diameter(mm) | Nomimal Weight(lbs) | Nominal Weight(kg) |
|---|---|---|---|---|
| Spools | 4 | 100 | 1-1/2, 2-1/2 | 0.7, 1.1 |
| 8 | 200 | 10 | 4.5 | |
| 12 | 300 | 25, 33 | 11.4, 15 | |
| 14 | 350 | 50 | 22.8 |
*Net weights shall be within ±10% of the nominal weight.
TYPICAL MECHANICAL PROPERTIES (As Welded)
| AWS No. | Tensile Strength, min(ksi) | Tensile Strength, min(MPa) | Elongation, min(%) | Heat Treatment |
|---|---|---|---|---|
| ER410NiMo | 110 | 760 | 15 |
Heat to 1100°F to 1150°F [595°C to 620°C], hold for one hour (–0, +15 minutes), and air cool to ambient. |
Available Diameters MIG with Operating Range in Amps
| Diameter(inch) | Diameter(mm) | Amps(A) |
|---|---|---|
| 0.023” | 0.6 | 35 – 70 |
| 0.030” | 0.8 | 50 – 100 |
| 0.035” | 0.9 | 160 – 210 |
| 0.045” | 1.2 | 180 – 250 |
MIG SPOOL DIMENSIONS
| Dimensions of 4, 8 and 12 in [100, 200 and 300 mm] Standard Spools | |||||||||
| Type | Spools Details | 4 in [100mm] | 8 in [200mm] | 12 in [300mm] | 14 in [350mm] | ||||
| inch | mm | inch | mm | inch | mm | inch | mm | ||
| A | Diameter, max | 4.0 | 102 | 8.0 | 203 | 12 | 305 | 14 | 355 |
| B | Width Tolerance | 1.75 ±0.03 |
46 +0，-2 |
2.16 ±0.03 |
56 +0，-3 |
4.0 ±0.06 |
103 +0,-3 |
4.0 ±0.06 |
103 +0,-3 |
| C | Diameter Tolerance | 0.63 +0.01.-0 |
16 +1,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
2.03 +0.06,-0 |
50.5 +2.5,-0 |
| D | Diameter between Axes Tolerance | — — |
— — |
1.75 ±0.02 |
44.5 ±0.5 |
1.75 ±0.02 |
44.5 ±0.5 |
1.75 ±0.02 |
44.5 ±0.5 |
| E | Diameter Tolerance | — — |
— — |
0.44 +0,-0.06 |
10 +1,-0 |
0.44 +0,-0.06 |
10 +1,-0 |
0.44 +0,-0.06 |
10 +1,-0 |